MISTY X-WAX STRIPPER

A nonflammable, foaming wax stripper with an inverted valve. Cleans and strips areas where a floor machine cannot reach. Ideal for baseboards, metal doors and frames. 18-oz. aerosol can.

This wax stripper is a specific formulation developed to let chemistry do the hard work of removing years of wax and buildup on tile, wood, linoleum and composition tile.

All waxes and floor finishes (including acrylic & polymer) leave excessive and very heavy coatings of old wax in every area where foot traffic is minimal: under desks, tables, counters, along walls, all floor areas that are not exposed to normal foot traffic. This wax and finish build up becomes unsightly, turns yellow or brown with age and is difficult to maintain properly for the well-kept, glossy appearance that is most desirable for floors in offices, institutions, hotels, hospitals and public places. This excellent product leaves your floor clean and ready for that new wax to be applied. Dirt and wax build up are quickly emulsified by chemical action for easy, speedy removal.

Directions For Use

Shake can well and invert before using. Before using, determine suitability and safety of product on surface to be cleaned. Hold can upside down. Spray wax stripper about 6 to 10 inches from baseboard or floor surface. A thin, even coating should cover the wax and soil. Do not apply to painted surfaces-immediately wipe off any overspray. Wait 3 to 5 minutes. Then wet scrub the surface using either a white cleaning pad, cleansing sponge or similar item. Rinse surface with clean, warm water.